B5 Series 60W Desktop Adapter

Features
Model
Parameters

S240S250A4

S120S500A4

SB6D-060-1B

Rated Output Voltage

DC +24V

DC +12V

DC +24V

Output Interface Location

φ2.1*5.5*12mm straight head round fork, 1185, 18AWG, L=1.5M (Customizable according to customer requirements)

Output Voltage Range

Setting error:±5%

Rated Output Current

2．5A

5.0A

2．5A 

Load current range

0～2.5A( MAX=2.5A)

0～2.5A( MAX=5.0A)

0～2.5A( MAX=2.5A)

Output Voltage Ripple

Vp-p100Hz<50mV；Vp-pmax<200 mV

Vp-p100Hz<50mV；Vp-pmax<120 mV

Vp-p100Hz<50mV；Vp-pmax<200 mV

Li;Lo Regulation

Line:±0.5%；Load:±0.5%

Overall Voltage Regulation Accuracy

±3%

Rated Output Power

60W

Rated Operating Efficiency

≈82%(Output power is rated, AC100V)

Rated Input Voltage

Input range: AC100~240V or 85~265V; Rated voltage: AC220V. Interface positions: 3-pin FG, AC-L, AC-N.

Rated Input Current

Rated current: AC 1.2A (AC 220V), current range: AC 0.05～1.2A

AC Input Frequency

Rated AC voltage frequency range 47～63Hz, sine wave

Inrush Current

The inrush current to the power grid at the moment of power-on: the maximum value during cold start is 20A/10ms.

Output Overload Protection

The overload protection point is approximately 110%~180% of the rated output power. The overload protection is an online power limiting and voltage reduction method.

Power supply timing parameters

Setup time ≈ 200ms; Settlement time ≈ 50ms; Hold-up time ≈ 20ms

Dielectric strength parameters

Input-output: AC1.5KV; Leakage current <5mA; 50Hz; 1min.

Operating temperature parameters

The operating temperature drift coefficient is approximately ±0.03 [%/℃]; the absolute temperature rise coefficient is approximately 0.50 [℃/W]; the absolute temperature rise of the chassis when operating at rated power is 30℃±5℃.

Environmental conditions parameters

Storage environment: -20℃ to +85℃; 10% to 95%RH. Operating environment: -10℃ to +50℃; 20% to 90%RH. (Varies depending on the operating environment and power consumption)

Cooling method

Designed for continuous operation, with self-cooling and heat dissipation assistance. (Power consumption and lifespan are affected by differences in the usage environment and installation location.)

External dimensions and mounting dimensions

Specifications and dimensions:L118×W60*H37

Net weight and color

Total weight 400; black surface

Certification Security Specifications

National Standard 3C

Note: 1) All the above test indicators were measured under the following conditions: within the rated input voltage and rated output load range, in an environment of 25℃ and 85%RH, with no wind.

2) Output DC voltage ripple test: A 30cm long, 1mm² cross-section parallel stranded wire with 0.1μF and 0.47μF capacitors connected to one end was bypassed at the test point. The maximum peak-to-peak value of the main frequency ripple (Vp-p100Hz) and the maximum peak-to-peak value of the combined ripple (Vp-pmax) were measured respectively.

3) Li voltage regulation: When the load is at its rated value, the input voltage varies within the rated range; Lo load regulation: When the input is at its rated voltage value, the load varies from zero to its rated value.

4) Only suitable for safe use in non-tropical climates.