G-series wall-mounted horizontal adapter

• Compact size and lightweight.

• High reliability and low price.

• Wide input voltage range.

• High conversion efficiency and low operating temperature rise.

• Built-in filter circuit, minimizing external radiated interference.

• Basic protection circuitry, providing good environmental adaptability.

• 4-hour, 100% full load aging and full-series functional testing.                                                           

Features
Model
Parameters

S120S200H1

S090S200B2

S090S250A0

Rated Output Voltage

DC +12V

DC +9V

DC +9V

Output Interface Location

φ2.1(2.5)*5.5*10(12)mm straight-head tuning fork with magnetic ring 2464 22AWG L=1.5M

Output Voltage Range

Setting error:±5%

Rated Output Current

2．0A

2．0A

2．5A

Load current range

0～2.0A( MAX=2.0A)

0～2.0A( MAX=2.0A)

0～2.5A( MAX=2.5A)

Output Voltage Ripple

Vp-p100Hz<50mV；Vp-pmax<100 mV

Li;Lo Regulation

Line:±0.5%；Load:±0.5%

Overall Voltage Regulation Accuracy

±5%

Rated Output Power

25W

20W

25W

Rated Operating Efficiency

≈80%(Output power is rated, AC100V)

Rated Input Voltage

Input range: AC100~265V; Rated voltage: AC220V. Interface positions: Three-pin FG, AC-L, AC-N.

Rated Input Current

Rated current: AC 0.25V (AC 220V), current range: AC 0.05～0.8A

AC Input Frequency

Rated AC voltage frequency range 47～63Hz, sine wave

Inrush Current

The inrush current to the power grid at the moment of power-on: the maximum value during cold start is 20A/10ms.

Output Overload Protection

The overload protection point is approximately 120% to 220% of the rated output power. The overload protection is implemented through online power limiting and voltage reduction.

Power supply timing parameters

Setup time ≈ 200ms; Settlement time ≈ 50ms; Hold-up time ≈ 20ms

Dielectric strength parameters

Input-output: AC1.5KV; Leakage current <5mA; 50Hz; 1min.

Operating temperature parameters

The operating temperature drift coefficient is approximately ±0.03 [%/℃]; the absolute temperature rise coefficient is approximately 0.50 [℃/W]; the absolute temperature rise of the chassis when operating at rated power is 30℃±5℃.

Environmental conditions parameters

Storage environment: -20℃ to +85℃; 10% to 95%RH. Operating environment: -10℃ to +50℃; 20% to 90%RH. (Varies depending on the operating environment and power consumption)

Cooling method

Designed for continuous operation, with self-cooling and heat dissipation assistance. (Power consumption and lifespan are affected by differences in the usage environment and installation location.)

External dimensions and mounting dimensions

Specifications and dimensions:L75×35*H52

Net weight and color

Total weight 400; black surface

Note: 1) All the above test indicators were measured under the following conditions: within the rated input voltage and rated output load range, the environment was 25℃, 85%RH, and there was no wind.

2) Output DC voltage ripple test: A parallel stranded wire with a length of 30cm and a cross-section of 1mm², with 0.1μF and 0.47μF capacitors connected to one end, was bypassed at the test point. The maximum peak-to-peak value of the main frequency ripple Vp-p100Hz and the maximum peak-to-peak value of the combined ripple Vp-pmax were measured respectively.

3) Li voltage regulation rate: When the load is at the rated value, the input voltage varies within the rated range; Lo load regulation rate: When the input is at the rated voltage value, the load varies from zero to the rated value.